|
| |
|
| |
Piercing Nozzles
QUICK LINK - Model
1000 -
2500 -
900 Series -
Attic -
Comparison -
Series 100 -
200 -
300 -
300 Angle |
|
The Original Model 1000
From simple to hard to
reach fires, the original FlameFighter gets you to the source of
the fire quickly. In just seconds, one or two firefighters can
insert the FlameFighter nozzle into virtually any desired entry point and generate a
high pressure spray covering up to a 2400 sq. ft. area at 150 psi.
The "FlameFighter 1000" can be inserted two ways: first by swinging it like a
battering ram, second by driving it in with a mallet.
Uses include but are not limited to: roofs, doors, walls,
floors, foundation block, steel buildings, aircraft, vents,
voids, and etc.
The original FlameFighter model 1000 is crafted from the finest steels.
This unit measures 60" long and weighs 36 pounds. Max GPM is 320 and
it comes standard with NST threads. Other threads available by request.
Mounting hardware included.
See everyday uses.
|
|
The Lightweight FlameFighter
Model 2500
This unit allows you to determine
the length best suited for your firefighting situation. Modular
sections of 2', 3', 6' give you the lengths of your choice.
Manufactured of the finest high quality steels and aircraft aluminum.
Models 1000 and 2500 develop a 2400 sq. ft. waterball at 150 psi
and max GPM of
320. Mounting brackets included.
See everyday uses.
|
900 Series Piercing Nozzles |
These new nozzles combine the best of durability,
flexibility, and are lightweight. They all have removable nozzles
which allow for extension tubes to be added for extra reach (2 feet per
extension). They can also be driven in with a small mallet if needed.
This unique nozzle design needs to be driven in only 3.75 inches to have
full penetration of the sprayer unit. Ideal for walls, and with
coverage of up to 25 feet in all directions. It is powerful enough
for fires in attics, basements, mobile homes, garages, vehicles, or any
confined space.
These piercing nozzles feature a unique safety handle. The safety
handle allows a firefighter to safely hold the
unit when a mallet is being used to drive the nozzle in. The handle
is removable if needed. They come
with 1.5 NST threads as standard. Other threads are available.
Designed for the rugged demands of the fire service world wide.
Mounting Brackets included. All models available without
valve.
See
everyday uses. |
902 K |
904 K |
910 K |
906 K |
Attic Nozzle Kit
|
|
Designed to be used as a large portable sprinkler
system for use in attic areas of residential buildings to large scale
apartments, hotels, and commercial buildings, etc.
Easy to deploy, by extending the nozzles equally from the peak of the roof or
the area that you wish to establish a water wall (Note, hose is marked in
the middle). The nozzles can be driven in with a sledge hammer or by
creating a small hole with a fire ax or depending on the roofing
material, a chain saw or other cutting equipment to gain entry. You can daisy
chain them together for more coverage or add a hand line on the end.
See everyday uses.
125 GMP / 50 Ft span.
| PART# |
DESCRIPTION |
| 974 |
Comes with
two complete 975's plus, one 25' hose section |
| 975 |
Includes
built in safety handle for use when nozzle is being driven in,
8" retainer plate, standard nozzle, strike plate and NST
coupling, and end cap are standard. |
| 972 |
Same as
974, with a water shut off valve included. |
|
974 |
 |
|
Piercing
Nozzle Comparison Data
| MODEL |
Max GMP |
Drivable |
Extendable |
| 902 |
174 |
Yes |
Yes |
| 904 |
174 |
Yes |
Yes |
| 906 |
139 |
Yes |
Yes |
| 910 |
174 |
Yes |
Yes |
| 972 |
120* |
Yes |
Yes |
| 974 |
120* |
Yes |
Yes |
| 1000 |
300 |
Yes |
No |
| 2500 |
217 |
No |
Yes |
|
Augustus Fire Tool
Rig Ready Packages
|
|
Series 100 *Portable Extinguisher Tool with 6.5 foot hose
*Tool Specific Stainless Steel Mounting Shoe. Pre
drilled holes on 3 sides allow for a variety of mounting
configurations.
*Handle Hold Down |
 |
|
Series 200
*5" Penetrating
Snout Tool with Full Time Swivel (FTS)
*6.5 ft. 1" I.D. Flat Hose "WHIP" with 1 1/2" NST Swivel
*Tool Specific Stainless Steel Mounting Shoe.
Pre-drilled holes on 3 sides allow for a variety of
mounting configurations.
*Handle Hold Down
*1" Ball "D" Handle Shut-off
*5/8" Smooth Bore Tip |
 |
|
Series 300
*Angle Handle,
7 1/4" Penetrating Snout Tool with FTS
*6.5 ft. 1" I.D. Flat Hose "WHIP" with 1 1/2" NSL Swivel
*Tool Specific Stainless Steel Mounting Shoe.
Pre-drilled holes on 3 sides allow for a variety of
mounting configurations.
*Handle Hold Down
*1" Ball "D" Handle Shut-off
*5/8" Smooth Bore Tip |
 |
|
Series 300 Angle Head, 5" Penetrating Snout
Tool*6.5 ft. 1" I.D. Flat Hose
"WHIP" with 1 1/2" NSL Swivel
*Tool Specific Stainless Steel Mounting Shoe.
Pre-drilled holes on 3 sides allow for a variety of
mounting configurations.
*Handle Hold Down
*1" Ball "D" Handle Shut-off
*5/8" Smooth Bore Tip |
 |
|
|
|
| |
| |
|
|
| |
|
